Features:
>> Wide range of MPPT voltage:120-500V
>> Support LCD display & Smart LCD setting
>> Available Export control CT sensor function
>> Monitoring inverters freely via computers or mobile phones
>> Full protection function: Over-voltage, over-frequency, over-current,
over-temperature, and AC short-circuit automatic protection
>> Intelligent BMS battery management function
>> Fanless low-noise design
>> IP65 Dust-proof and water-proof
>> Support on/off grid mode switch, EPS output
>> Support battery charging/discharging according to the time setting
>> Independent AC input port for diesel generator
>> Support storing energy from diesel generator
>> Support different power inverters parallel connection
>> ARC fault detection optional
>> 100% unbalanced output, each phase max, output up to 50% rated power
>> Support different power inverters parallel connection
>> 20 PCS inverters parallel for off-grid operation
>> Colorful 5-inch touch LCD, IP65 protection degree
>> Support on/off grid mode switch, EPS output
>> Support battery charging/discharging according to the time setting
>> Independent AC input port for diesel generator
>> Support storing energy from diesel generator
>> Support different power inverters parallel connection
>> ARC fault detection optional
Features:
– Compatable for Big Capacity PV Panel WIFI / 4G Plug Optional
– Max. PV Voltage up to 1100V Type I DC /AC SPD
– DC/AC Ratio up to 1.5 / 1P66 Protection
– High Efficiency up to 98.7
Features:
– Compatable for Big Capacity PV Panel WIFI / 4G Plug Optional
– Max. PV Voltage up to 1100V Type I DC /AC SPD
– DC/AC Ratio up to 1.5 / 1P66 Protection
– High Efficiency up to 98.7
Features:
– Compatable for Big Capacity PV Panel WIFI / 4G Plug Optional
– Max. PV Voltage up to 1100V Type I DC /AC SPD
– DC/AC Ratio up to 1.5 / 1P66 Protection
– High Efficiency up to 98.7
Features:
Compatable for Big Capacity PV Panel
Wi-Fi / 4G Plug Optional
Max. PV Voltage up to 1100V
Type II DC /AC SPD
DC/AC Ratio up to 1.5
IP66 Protection
High Efficiency up to 98.7%
Reactive Power Control
>> IP65 waterproof and dustproof makes the inverter available for
various
working conditions.
>> Built-in WiFi for mobile monitoring (App is available)
>> 150% unbalanced load support
>> Optional dual outputs for smart load management (check sales)
>> Buit-in AC coupled function
>> User-adjustable charging current and voltage
>> Reserved communication port for BMS (RS485)
>> Parallel operation of up to 6 units
>> Pure sine wave solar inverter(on/off Grid)
>> Output power factor 1.0
>> WIFl&GPRS available for IOS and Android
>> Inverter running without battery
>> One-key restoration to factory Settings
>> Built-in Lithium battery automatic activation
>> Built-in 120A(for 3.6KW/6.2KW)/140A(for 4. 2KW)
>> MPPT:Max 6200w(for 3.6kw/4.2kw),max 6500w
(for 6.2kw) solar charge
>> High PV input voltage range(90~450VDC) Built-in anti-dusk kit for
harsh environment
>> Smart battery charge design to optimize battery life
>> Dual output(V2.0)
– Pure sine wave output
– Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc.)
– Built-in MPPT 80A solar charge controller
– MAX PV Array Open Circuit Voltage: 450V
– Can provide the power to the load without battery
– Combining solar system, AC utility, and battery power source to supply continuous power
– Overload, short circuit and Deep discharge protection
– Cold start function
– Support USB monitoring function
– Can Run Without Battery
Features:
– LCD display, easy to operate on LCD screen
– Multi stage charging (3-stage charging , parallel charging and
equalized charging function)
– BTS – Battery remote temperature sensor terminal
– Enable to charge Lithium, Gel, lead-acid battery
– With RS485 & USB communication port
– Protection: PV array short circuit, PV reverse polarity, Battery reverse
polarity, Over charging, Output short circuit
Features:
– Industrial-grade Micro Processor Control
– 12V,24V and 48V can be adaptive
– Built-in maximum power point tracking algorithm, the charging efficiency is 15%-20% higher than PWM mode
– With the charging overcurrent protection function, the controller will automatic reduce the charger current
– With the Solar reverse polarity protection
– With the Overtemperature protection
– With DC power supply function ,can be connected DC energy-saving lamps
– Wall hanging case
Features: Efficient and flexible
– Advanced three-level technology max. efficiency 98.8%
– 9-12 MPPTs design, compatible with bifacial PV panel
– Anti-PID and PID recovery function Safe and reliable
– IP66 and C5 anti-corrosion grade, intelligent fan with IP68 protection
– Redundant power supply by AC and DC
– Built-in AC / DC SPD protection
Features: Efficient and flexible
– 3 Level topology, Maximum Efficiency 99%
– 3/4 MPPT design Safe and reliable
– Outdoor IP65 design, no derating below 3000m altitude
– Integrated AC/DC full lightning protection
– All industrial grade electronic device, ensure 25 years full
life circle running
Features: Efficient and flexible
– 2 independent MPPT, more generation
– Advanced control algorithms and high adaptation ability
to the grid, improving the stability of power generation system Safe and reliable
– IP65 for outdoor application
– Integrated AC/DC full lightning protection
– All industrial grade electronic device, ensure 25 years full life circle running
Features: High efficiency
– High-efficiency inverter topology ensures annual power generation
– Advanced control algorithms and high adaptation ability to
the grid, improving the stability of power generation system Safe and reliable
– IP65 for outdoor application
– Integrated AC/DC full lightning protection
– Aluminum alloy die-casting integrated chassis, ensure 25 years full life circle running
– Smart LCD setting (Working modes, Charge Current, Charge voltage, etc.)
– Built-in MPPT solar charge controller 100A
– MPPT efficiency max 98%
– Powerful AC charge rate up to 140Amp
– DC start &Automatic Self-Diagnostic Function
– USB Monitoring Function
– Supporting AGS, BTS port
