>> Online double conversion
>> Optimized battery management
>> N+X parallel redundant design, up to 6 units available,
>> High power factor
>> Wide input adaptability
>> The range of AC input voltage is (380Va/400Vac/415Vac)(±15%)
>> Strong overload capability
>> SNMP adapter (optional): for remote monitor through network
>> RS232 & RS485 communication ports: for local monitor
with corresponding software, and MODBUS protocol is network
>> Wide input voltage range:110~300Vac
>> Input power factor 0.99 with PFC
>> Selectable output voltage: 208/220/230/240Vac
>> Emergency power off function (EPO)
>> ECO mode operation for energy saving
>> Intelligent fan speed regulation
>> Multiple protection function: short-circuit, overload, overheat, battery
over charge and over discharge, output low voltage and fan fault alarm
>> Multiple communication interface:RS232 (USB/EPO/Relay card
/SNMP card optional)
Features:
– N+X parallel redundancy, support maximum 4 units in parallel
– Multiple communication interface:RS232/USB/EPO
(Relay card /SNMP card optional)
– Multiple protection function short-circuit, overload, overheat,
battery overcharge and over discharge, output low voltage and fan fault alarm
>> N+X parallel redundancy, support maximum 4 units in parallel
>> Wide input voltage range: 110~286Vac
>> Wide input frequency range
>> Selectable output voltage: 208/220/230/240Vac
>> Multiple communication interface: RS232/USB/EPO (Relay card/SNMP card optional)
>> Intelligent fan speed regulation
>> Multiple protection function: short-circuit, overload, overheat, battery
overcharge and over discharge, output low voltage and fan fault alarm
Features:
>> N+X parallel redundancy, support maximum 4 units in parallel
>> Wide input voltage range: 110~286Vac
>> Wide input frequency range
>> Selectable output voltage: 208/220/230/240Vac
>> Multiple communication interface: RS232/USB/EPO (Relay card/SNMP card optional)
>> Maximum charging current up to 10A
>> Intelligent fan speed regulation
>> Multiple protection function: short-circuit, overload, overheat, battery
overcharge and over discharge, output low voltage and fan fault alarm
Features: >> The UPS will keep on single or parallel working, if any module fail >> High input power factor, it is up to 0.99 >> Support parallel expanded operation: maximum is 6 units. >> Support sharing batteries for the UPS in parallel >> Support SNMP, RS232, RS485, BMS, Dry contact interface
>>Wide input voltage range:110~300Vac
>>Input power factor 0.99 with PFC
>>Selectable output voltage: 208/220/230/240Vac
>>Emergency power off function (EPO)
>>ECO mode operation for energy saving
>>Intelligent fan speed regulation
>> Multiple protection function: short-circuit, overload, overheat, battery overcharge and over discharge, output low voltage and fan fault alarm
>> Multiple communication interface:RS232 (USB/EPO/Relay card/SNMP card optional)
>> The output power factor up to 0.9 better matches the load.
>> The range of AC input voltage is (380Va/400Vac/415Vac) (-25%/+20%).
>> Wide input frequency ranging from 45Hz to 65Hz,
>> RS232 & RS485 communication ports: and MODBUS protocol is optional.
>> SNMP adapter (optional): for remote monitor through network.
>> A concave red EPO button with transparent cover is embodied in the LCD control panel for emergency power off.
>> Generator mode.
Features:
>> N+X parallel redundancy, support maximum 4 units in parallel
>> Wide input voltage range: 208~478Vac
>> Wide input frequency range 40~70Hz
>> Generator compatible
>> Dual input source (Optional for standard unit)
Features:
– LCD support Rack/Tower convertible design >> N+X parallel redundancy, support maximum 4 units in parallel >> Online double conversion with DSP control >> Maximum charging current up to 20A (Settable)
Dual input source
– Support 3/3 and 3/1 and 1/1 operation >> 50/60Hz Frequency converter mode >> The output can meet 100% unbalanced load
– RS232, RS485, Parallel, Intelligent Slot (SNMP card/ Relay
card (Optional)),BMS (Optional),EPO port, Output port, MAINTAIN-AUXSWS port
Features: >> The UPS will keep on single or parallel working, if any module fail . >> High input power factor, it is up to 0.99 >> Support parallel expanded operation: maximum is 6 units. >> Support sharing batteries for the UPS in parallel >> Support SNMP, RS232, RS485, BMS, Dry contact interface
Features:
– N+X parallel redundancy, support maximum 4 units in parallel
– Multiple communication interface:RS232/USB/EPO
(Relay card /SNMP card optional)
– Maximum charging current up to 10A
– Multiple protection function short-circuit, overload, overheat,
battery overcharge and over discharge, output low voltage and fan fault alarm
Features:
– LCD support Rack/Tower convertible design >> N+X parallel redundancy, support maximum 4 units in parallel >> Online double conversion with DSP control >> Maximum charging current up to 20A (Settable)
Dual input source
– Support 3/3 and 3/1 and 1/1 operation >> 50/60Hz Frequency converter mode >> The output can meet 100% unbalanced load
– RS232, RS485, Parallel, Intelligent Slot (SNMP card/ Relay
card (Optional)),BMS (Optional),EPO port, Output port, MAINTAIN-AUXSWS port
– High power density
– Online double conversion with full digital control
– Smart charger design for optimized battery performance
– ECO mode operation for energy saving
– Versatile LCD human-computer interface
Multiple communication interface:RS232 (USB/EPO/Relay card /SNMP card optional)
