PS series VRLA battery uses AGM technology and high-purity raw materials.
Its good floating back up and large current discharge performance makes it
optimal and economical choice for UPS/EPS.
>>Wide input voltage range:110~300Vac
>>Input power factor 1.0 with PFC
>>Selectable output voltage: 208/220/230/240Vac
>>Emergency power off function (EPO)
>>ECO mode operation for energy saving
>>Intelligent fan speed regulation
>> Multiple protection function: short-circuit, overload, overheat, battery overcharge and over discharge, output low voltage and fan fault alarm
>> Multiple communication interface:RS232 (USB/EPO/Relay card/SNMP card optional)
Features:
>> Wide range of MPPT voltage:120-500V
>> Support LCD display & Smart LCD setting
>> Available Export control CT sensor function
>> Monitoring inverters freely via computers or mobile phones
>> Full protection function: Over-voltage, over-frequency, over-current,
over-temperature, and AC short-circuit automatic protection
>> Intelligent BMS battery management function
>> Fanless low-noise design
>> IP65 Dust-proof and water-proof
PS ( High Rate ) series Valve Regulated Lead
Acid (VRLA) battery is designed for heavy load
discharge applications with 8 years design
life in float service. By using strong grids, thick
plate and specially designed active material.
It is with lower I.R, lower self discharge rate,
high power, and longer service life. The HR
series battery offers 30% more power output
than the standard series. It is suitable for high
power standby used, such as datacenter, UPS,
EPS etc.
>> Online double conversion
>> Optimized battery management
>> N+X parallel redundant design, up to 6 units available,
>> High power factor
>> Wide input adaptability
>> The range of AC input voltage is (380Va/400Vac/415Vac)(±15%)
>> Strong overload capability
>> SNMP adapter (optional): for remote monitor through network
>> RS232 & RS485 communication ports: for local monitor
with corresponding software, and MODBUS protocol is network
HR ( High Rate ) series Valve Regulated Lead
Acid (VRLA) battery is designed for heavy load
discharge applications with 8 years design
life in float service. By using strong grids, thick
plate and specially designed active material.
It is with lower I.R, lower self discharge rate,
high power, and longer service life. The HR
series battery offers 30% more power output
than the standard series. It is suitable for high
power standby used, such as datacenter, UPS,
EPS etc.
>> Wide input voltage range:110~300Vac
>> Input power factor 0.99 with PFC
>> Selectable output voltage: 208/220/230/240Vac
>> Emergency power off function (EPO)
>> ECO mode operation for energy saving
>> Intelligent fan speed regulation
>> Multiple protection function: short-circuit, overload, overheat, battery
over charge and over discharge, output low voltage and fan fault alarm
>> Multiple communication interface:RS232 (USB/EPO/Relay card
/SNMP card optional)
HR ( High Rate ) series Valve Regulated Lead
Acid (VRLA) battery is designed for heavy load
discharge applications with 8 years design
life in float service. By using strong grids, thick
plate and specially designed active material.
It is with lower I.R, lower self discharge rate,
high power, and longer service life. The HR
series battery offers 30% more power output
than the standard series. It is suitable for high
power standby used, such as datacenter, UPS,
EPS etc.
Features:
– N+X parallel redundancy, support maximum 4 units in parallel
– Multiple communication interface:RS232/USB/EPO
(Relay card /SNMP card optional)
– Multiple protection function short-circuit, overload, overheat,
battery overcharge and over discharge, output low voltage and fan fault alarm
– High Acid volume per ampere hour to avoid battery going dry for longer life.
– Latest PE Industrial Sleeve Separator for double life.
– Deep Cycle Design for quick recovery from high depth of discharge.
– Low self-discharge for longer shelf life
– Resistance to abuse due to deep discharge
– Very Low maintenance.
– Heavy Duty Terminals suitable for carrying heavy current.
– Made of 99.97% purity which enhances performance.
>> N+X parallel redundancy, support maximum 4 units in parallel
>> Wide input voltage range: 110~286Vac
>> Wide input frequency range
>> Selectable output voltage: 208/220/230/240Vac
>> Multiple communication interface: RS232/USB/EPO (Relay card/SNMP card optional)
>> Intelligent fan speed regulation
>> Multiple protection function: short-circuit, overload, overheat, battery
overcharge and over discharge, output low voltage and fan fault alarm
Features:
>> N+X parallel redundancy, support maximum 4 units in parallel
>> Wide input voltage range: 110~286Vac
>> Wide input frequency range
>> Selectable output voltage: 208/220/230/240Vac
>> Multiple communication interface: RS232/USB/EPO (Relay card/SNMP card optional)
>> Maximum charging current up to 10A
>> Intelligent fan speed regulation
>> Multiple protection function: short-circuit, overload, overheat, battery
overcharge and over discharge, output low voltage and fan fault alarm
